THE VOICE OF THE NEW ZEALAND AUTOMOTIVE INDUSTRY

A NARVA AeroTech light box on a vehicle at night with its amber warning light on

NARVA AeroTech light box combines four safety functions

Sponsored content
A warning light, work light, high-level brake light, and reverse alarm in one housing; fewer parts to mount, wire, and maintain on each commercial build

Every warning light, work lamp, brake light and reversing alarm added to a commercial vehicle means another bracket to mount, another cable to run and another part to maintain. NARVA’s AeroTech® Multi-Function Light Box combines all four into a single assembly, aimed at body builders, fleet operators and the workshops that fit out service and utility vehicles.

Four functions, one housing

A NARVA AeroTech light box showing green on a vehicle roof rack

The unit carries an SAE Class 1 warning light, a 1,222-lumen rear tray and work light, a high-level brake light and a reverse alarm. The work light covers loading, unloading and after-hours work around the vehicle. The high-level brake light keeps braking visible when canopies, toolboxes or equipment block the standard rear lamps.

The reverse alarm can be set to a traditional beep or a squawk/broadband tone, so no separate alarm needs to be fitted. A broadband alarm uses a spread of frequencies rather than a single pitch, which makes it easier for people nearby to tell where the sound is coming from.

“Every component you eliminate is one less part to wire, mount and maintain throughout the vehicle’s life,” says James Pearson, NARVA global brand manager.

A ute tray lit by a rear work light at night

Less time on the workshop floor

For builders producing dozens or hundreds of commercial vehicles a year, the saving is in labour. Each extra bracket, cable and connector adds fitting time and another potential failure point. With four products in one unit, installers spend less time mounting parts and routing wiring, and NARVA’s cradle mounting system is designed for fast fitment across a wide range of vehicles. The result is a cleaner installation and more consistent builds across a fleet.

An alternative to a mine bar

Not every vehicle needs a full-width mine bar, but many still need warning lighting, rear work lighting, a reversing alarm and a brake light that can be seen. The light box provides those functions in one compact, low-profile unit. NARVA lists service vehicles, utility and municipal fleets, construction, agricultural and mining vehicles, vans, utes, and trade and maintenance vehicles among its applications.

A NARVA AeroTech light box on a vehicle headboard at sunset

Sealed for washdowns

The housing is heavy-duty polycarbonate, and NARVA describes the lens as virtually unbreakable. The unit is sealed to IP67 and IP69K, which rates it against dust, temporary immersion, and high-pressure, high-temperature washdowns. A selectable day/night mode cuts warning light output to 30% after dark to limit glare for operators and other road users.

The warning light holds SAE Class 1, ECE R65 Class 2 and California Title 13 approvals. It is also certified Radio Safe Level 3, which limits electromagnetic interference with two-way radios and other communications equipment on site.

Three versions are available: amber (85018A), amber with a clear lens (85018AC), and amber/green (85018AG).

For more information, contact sales@nz.brownwatson.com or 09 525 4575

Audi Essential Service — $399 for all Audi vehicles 8 years and older