THE VOICE OF THE NEW ZEALAND AUTOMOTIVE INDUSTRY

The Corghi EM9680 Plus DotLine wheel balancer with its touchscreen monitor

Corghi EM9680 Plus DotLine wheel balancer

Sponsored content
Automaster’s latest Corghi balancer pairs a 22-inch touchscreen with automatic wheel measurement and laser-guided weight placement

Automaster has added the Corghi EM9680 Plus DotLine to its range of wheel balancers. The machine is run from a 22-inch touchscreen that works with gloves on, or with wet or dirty hands, and it reads the wheel’s offset, width, and diameter automatically rather than relying on manual entry.

The Smart Arm Pro digital gauge measures rims up to 28 inches and selects the balancing program, while a sonar sensor reads the width without contact. At the end of each spin, the machine brakes and positions the wheel to the correct balancing point. It is available with a manual quick nut or an automatic pneumatic clamp.

Weight placement

On alloy rims, the LaserDot pointer shows the technician where each adhesive counterweight should go. Weight Management Plus software is designed to reduce the number of weights used — Corghi claims up to 30% less counterweight and up to 20% less working time. Intelligent Positioning Lite assesses the set of tyres and suggests where each wheel should be fitted on the vehicle. Hidden Weight, Bike, Split, and Opt Flash programs are also built in.

Sizes and speeds

The balancer handles rims from 1 to 35 inches in diameter and 1.5 to 20 inches wide, with wheels up to 85kg and 1,118mm overall. A patented wheel guard design lets it sit against a wall, and an LED light illuminates the work area. Balancing speeds are 75, 85, or 98rpm, accuracy is ±1g, and an average spin on a 14kg wheel takes 5.5 seconds. It runs on single-phase 230V power. A sonar run-out module with BestFit software for checking radial eccentricity is available as an option, along with an oversized cone and spacer.

A multi-operator program allows three operators to use the machine simultaneously without having to reprogram wheel dimensions.

For more information, visit automaster.co.nz, call 0800 214 604, or email info@automaster.co.nz

Audi Essential Service — $399 for all Audi vehicles 8 years and older